AFDM 512 is an advanced series of electronically controlled continuous zoom and autofocus all-in-one digital microscopes with a large field of view by ToupTek Photonics. There are two models in the range with different working distances. All models have a superb 4K resolution live output and can store 8MP images. They have integrated HDMI/NETWORK/USB controls/outputs for the cameras, an Electronically Controlled Continuous Zoom Auto-focus Objective and an LED Integrated Illumination Light. AFDM is the abbreviation for Auto-focus Digital Microscope. Different products in the AFDM series can be configured with different accessory components to meet your application requirements.
The AFDM can be assembled with various holders and arms and provides a continuous zoom range with different lenses. The AFDM also supports an autofocus mode and a manual focus mode.
PLEASE NOTE THE STAND, HOLDER AND DISPLAY IN THE PICTUE ARE NOT INCLUDED IN THE PRICE INDICATED.
AFDM comes with a high-performance SONY CMOS sensor. It also has an embedded ARM core, allowing the camera to be connected directly to the HDMI monitor. The camera has XFCAMView software built within it, including Camera Control Panel, Auto Focus Control Panel, Measurement Toolbar, and Synthesis Camera Control Toolbar. Users can directly control the camera and perform various operations through a USB mouse. The images and videos captured by AFDM can be saved on an SD card/USB flash drive for on-site analysis and follow-up research.
The AFDM can be widely used in industrial inspection, medical observation, teaching and scientific research, automation system, and other fields.
AFDM512 has integrated HDMI/NETWORK/USB controls/outputs for the camera and video output (ToupView). The frame rate of the output is 4K/60FPS, and the zoom range is 1X~18X. It also supports electric zoom and auto focusing.
(Stand and monitor are optional accessories and are not included)
Related modules
AFDM digital modules:
Order Code
|
Sensor & Size(mm)
|
Pixel(μm)
|
G Sensitivity/Dark Signal
|
Sensor(FPS/Resolution)
|
Binning
|
Exposure(ms)
|
H4KPA
|
Sony IMX415LQR-C
1/2.8"(5.57x3.13)
|
1.45x1.45
|
300mv/0.13 with 1/30s
|
60@3840*2160
|
1x1
|
0.059~1000
|
The output parameters of different interfaces are shown in the following table:
Camera Model
|
Video Saving(FPS/Resolution)
|
HDMI2.0(FPS/Resolution)
|
USB3.0(FPS/Resolution)
|
NETWORK(FPS/Resolution)
|
H4KPA
|
60@3840*2160
60@1920*1080
60@1280*720
|
60@3840*2160
60@1920*1080
|
30@3840*2160
45@2688*1512
60@1920*1080
|
60@1920*1080
|
AFDM Lens Module Datasheet:
Order Code
|
Working Distance(mm)
|
Zoom Range
|
MTF(lp/mm)
|
Distortion
|
FOV@1X(mm)
|
FOV@18X(mm)
|
EMZO-18XA-250
|
205~255
|
0.021X~0.39X
|
160
|
0.5%
|
255x145
|
14.2x8
|
EMZO-18XA-640
|
400~670
|
0.0085X~0.1529X
|
160
|
0.5%
|
655.8x368.9
|
36.4x20.5
|
1X and 18x are defined as the normalized magnification, which is only used to represent the relative relationship between the lowest and highest magnification. Here, the normalized equations are 1x = 0.021/0.021; 18X=0.39/0.021;
AFDM Light Module:
Order Code
|
LED
|
Power
|
Inner Dia.(mm)
|
Out Dia.(mm)
|
DRL-5076A-NPC
|
8 CREE xpes
|
3V/3A
|
50
|
76
|
AALRL-200-7650
|
12 1W LED
|
12V/2A
|
50
|
76
|
DRL: LED direct ring light with adjustable brightness; NPC: No power cable
AFDM512 Series Camera Models:
Currently there are two models in the AFDM512 series, AFDM512A and AFDM512B, of which the lighting module can be specified at the time of purchase.
Model
|
Camera Module
|
Lens Module
|
Light Module
|
AFDM512A
|
H4KPA
|
EMZO-18XA-250
|
DRL-5076A-NPC/AALRL-200-7650
|
AFDM512B
|
H4KPA
|
EMZO-18XA-640
|
DRL-5076A-NPC/AALRL-200-7650
|
AFDM512 series camera supports two lens modules for different working distances, Users can choose the corresponding camera model according to the needs.
DETAILED SPECIFICATIONS:
Interface and Buttons:
USB Mouse
|
Connect USB mouse for easy operation with embedded XCamView software
Connect USB voice control for enable real-time control of camera snap, recording, freezing, and other operations. Please refer to Sec. Settings>Voice Control Control for voice control commands
|
USB3.0
|
Connect USB flash drive to save pictures and videos
Connect 5G WiFi module to transfer video wirelessly in real time
Connect USB microphone to record audio and video
Connect USB voice control for enable real-time control of camera snap, recording, freezing, and other operations. Please refer to Sec. Settings>Voice Control Control for voice control commands
|
HDMI
|
Comply with HDMI2.0 standard. 4K/1080P format video output and supporting automatic switch between 4K and 1080P format according to the connected monitors
|
USB Video
|
Connect PC or other host device to realize video image transmission with ToupView/ToupLite
|
LAN
|
LAN port to connect router and switch to transfer video with ToupView/ToupLite
|
ON/OFF
|
Power on/off switch
|
LED
|
Power LED indicator
|
SD
|
Comply with SDIO3.0 standard and SD card could be inserted for video and images saving
|
DC12V3A
|
DC12V3A power input
|
XCamView Software Functions:
|
UI Operation
|
With USB mouse to operate on the embedded XCamView
|
Image Capture
|
8M (3840*2160) JPEG/TIFF/RAW image in SD card or USB flash drive
(Default SD card priority, priority can be modified in settings)
|
Video Record
|
Video format:8M(3840*2160) H264/H265 encoded MP4 file
Video saving frame rate:60fps
|
Camera Control Panel
|
Including Exposure, Gain, White Balance, Sharpness, 3D Denoise, Saturation, Gamma, Contrast, Brightness, Power Frequency control
|
Measurement Toolbar
|
Including Calibration, Measurement, and measurement parameter Export functions
|
Synthesis Control Toolbar
|
Zoom In/Zoom Out(Up to 10X), Mirror/Flip, Freeze, EDF, Cross Line, Overlay, PIP , AF, LED, Browser(including Picture Browsing , Video Playback , Video Compare , Picture Compare , EDF , Stitch , Image Processing), Measurement Function
|
Auto Focus Control Panel
|
Including Zoom, Auto Focus, One Push, Manual Focus, Reset, and other functions
|
Software ToupView/ToupLite Environment under NETWORK/USB Video Output
|
White Balance
|
Auto White Balance
|
Color Technique
|
Ultra-Fine Color Engine
|
Capture/Control SDK
|
Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc)
|
Recording System
|
Still Picture or Movie
|
Operating System
|
Microsoft® Windows® XP / Vista / 7 / 8 / 8.1 /10(32 & 64 bit)/ToupView
OSx(Mac OS X)/ToupLite
Linux/ToupLite
|
PC Requirements
|
CPU: Equal to Intel Core2 2.8GHz or Higher
|
Memory: 4GB or More
|
Ethernet Port: RJ45 Ethernet Port
|
Display:19” or Larger
|
CD-ROM
|
CPU: Equal to Intel Core2 2.8GHz or Higher
|
Operating Environment
|
Operating Temperature(in Centidegree)
|
-10~ 50
|
Storage Temperature(in Centidegree)
|
-20~ 60
|
Operating Humidity
|
30~80%RH
|
Storage Humidity
|
10~60%RH
|
Dimensions
|
Length x Width x Height
|
80mm x 80mm x 122mm
|
Shipping Weight
|
0.75kg
|